Teco Westinghouse XP0154, 15 HP, 1800 RPM, 3 PH, 254T, 230/460V, TEFC- Explosion Proof

Teco Westinghouse XP0154, 15 HP, 1800 RPM, 3 PH, 254T, 230/460V, TEFC- Explosion Proof

Specifications:

APPLICATIONS:

• Grain Elevators
• Pumps
• Blowers
• Applications Where Explosive Gases are Present
• Applications Where Explosive Dusts/ Grains are Present

FEATURES:

• Output: 15 HP
• Speed: 1800 RPM
• Enclosure: Totally Enclosed Fan Cooled - Explosion Proof (IP55)
• Voltage: 230/460V
• Amperate: 17.9 Amps
• Power Factor: 85%
• Efficiency: 92.4%
• Service Factor: 1.15 (Continuous); (1.0 @ 50 Hz)
• Class I Div. 1 Group C & D and Class II Groups E F and G - Temp Code T2D/T3B Up to and Including F# 256T
• Class I Div. 1 Group D and Class II Groups E F and G - Temp Code T2D/T3B for F# 284T and Larger
• UL File: E84757
• CSA File: #64671
• Insulation: Class F
• Temperature Rise: Class B
• NEMA Design B Torques
• Standard with Klixon 9700K Temperature Limiting Switch - 1 per Phase
• Grounding Terminal: Inside Main Conduit Box
• Condiut Box: Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
• Ambient Temperature: Designed for < 40°
• Elevation: Designed for < 3300 ft
• Rotation: Bi-Directional
• Construction: Cast Iron Frame
• Fan Cover
• End Brackets and Main Conduit Box
• Capable of Withstanding Explosion Force as Required by UL
• Stainless Steel Breather Drains with Bronze Filters (For Horizontal Mount Only)
• Shaft: 1045 Carbon Steel
• Rotor Construction: Aluminum Die Cast Squirrel Cage
• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
• Paint Color: Dark Blue - Munsell 5 PB 4.5/2
• Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T - 280T (Non-regreasable)
• High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM Grease for F# 280TS and Larger
• Bronze Flinger on Both Ends
• Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger
• Nameplate: Stainless Steel
• VFD: Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1(4 / 5) - UL Listed for Inverter Duty(4 / 5)
• Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of up to 2200 Volts
• Inverter Duty Speed Ranges: VT = 3 - 60 Hz / CT for 140T - 210T Frames = 10 - 60 Hz
• CT for 250T - 320T Frames = 13 - 60 Hz / CT for 260T - 440T Frames = 16 - 60 Hz
• 9 Leads for 5 HP and Smaller
• 12 Leads for 7.5 HP to 125 HP
• 6 Leads for 150 HP and Larger