Description
AMT - 2761-95 Self-Priming Solids Handling Pump , 128 GPM, 2", 2 HP, 115-230 Volt, Cast Iron
**THIS WAS USED ONCE AS A TESTER AND IS IN PERFECT WORKING CONDITION WITH ZERO DEFECTS**
Description:
This line of AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling up to 3/8 in. diameter semi-solids. Built in Flapper/Check valves enable consistent self-priming to 20 feet.
AMT Centrifugal pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
- Cast iron construction with Buna-N seals, Max temperature 180°F
- Dual volute design
- Handles 3/8 in. diameter semi-solids
- Self cleaning, clog resistant impeller
- Built in flapper/check valve
- Steel base and handle
- Available in ODP or TEFC, single or three phase depending on model
- Self-primes to 20 ft.
Specifications:
| Engine/Motor Brand | AMT by Gorman-Rupp |
|---|---|
| Fuel Type | Electric |
| Engine/Motor Type | Electric, Open Drip Proof |
| Starting System | NA |
| Horsepower | 2.0 HP |
| Phase | Single-Phase |
| Pump Voltage | 115 Volt (Single-Phase), 230 Volt (Single-Phase) |
| Frequency | 60 Hz |
| Rated Current | 28/14 Amps |
| Pump RPM | 3450 |
| Thermal Overload Protect | Yes |
| NEMA Rating | NEMA 56J (Motor Frame) |
| Pump Type | Chemical Pump |
|---|---|
| Pump Style | Electric Centrifugal Pump |
| Inlet Diameter | 2" |
| Outlet Diameter | 2" |
| Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) | 128.0 |
| Max Total Head (Static) | 85 Feet |
| Maximum Pressure (PSI) | 37 |
| Max Suction Lift (Static, Wet, @ Sea Level) | 20 Feet |
| Solids Handling | Yes |
| Max Solids Handling (Inches) | 0.375" |
| Self Priming Pump | Yes, Wet Prime |
| Back Flow Check Valve | Yes |
| Housing Material | Cast Iron |
| Impeller Type | Self-Cleaning, Clog Resistant |
| Impeller Material | Cast Iron |
| Volute Material | Double |
| Seal Material (Mechanical Or Other) | Buna-N |
| Temperature Range | To 180 F |
| Port Type(s) | Discharge: Female (NPT), NPT |
| Altitude Affected | Yes |
Extra Information
Brand:
AMT Pumps & Parts
Weight:
75.00 LBS
