Description
Sta-Rite - Pentair DHF-51L - D Series High Head Self-Priming Cast Iron Centrifugal Pump (1-1/2 HP,1 Phase, 115/230V)+++USED/REBUILT+++
+++PUMP IS USED/REBUILT IN VERY GOOD WORKING CONDITION - SOLD AS IS WITHOUT ANY WARRANTY+++
Performance & Electrical Specifications
- Horsepower: 1.5 HP
- Motor Speed: 3450 RPM (single-speed, continuous duty)
- Voltage: 115V / 230V (Dual voltage, single-phase, 60 Hz)
- Full Load Amps: 19.2A at 115V / 9.6A at 230V
- Maximum Inlet Pressure: 20 PSI
- Maximum Discharge Pressure: 100 PSI
- Maximum Suction Lift: 25 feet (requires foot valve for depths below 15 feet)
Flow Capacity Data (GPM @ Total Head Feet)
| Total Head (Feet) | Pressure Equivalent (PSI) | Flow Rate (Gallons Per Minute) |
|---|---|---|
| 40 ft | 17.3 PSI | 60 GPM |
| 50 ft | 21.6 PSI | 58 GPM |
| 60 ft | 26.0 PSI | 55 GPM |
| 70 ft | 30.3 PSI | 50 GPM |
| 80 ft | 34.6 PSI | 45 GPM |
| 90 ft | 39.0 PSI | 38 GPM |
| 100 ft | 43.3 PSI | 30 GPM |
| 110 ft | 47.6 PSI | 20 GPM |
Materials of Construction
- Pump Casing: Heavy-duty cast iron (close-grained)
- Impeller: Precision-molded Noryl (thermoplastic, non-corrosive)
- Diffuser: Multi-port Noryl alignment
- Shaft: 416 Stainless Steel
- Mechanical Seal: Carbon / Ceramic faces with Buna-N elastomers
Physical & Connection Dimensions
- Net Weight: 75.0 lbs (34 kg)
- Suction Port: 1-1/2" NPT (Requires specialized Pentair PKG 52 suction flange kit)
- Discharge Port: 1-1/2" NPT (Top/side execution)
- Air Volume Control (AVC) Tapping: 1/4" NPT
- Max Liquid Temperature: 140°F (60°C)
- Max Ambient Operating Air Temp: 104°F (40°C)
Weight:
80.00 LBS
